Quick Answer: Do You Need Plumbers Putty To Install A Sink Drain??

Apply Plumber’s Putty

The putty will help the upper part of the drain assembly seal against the sink drain opening.

If you do not have plumber’s putty or cannot use it on your type of sink, then you can use silicone or even the foam or rubber gasket that comes with some pop-up assemblies.

How do you install a drain in a kitchen sink?

0:25

2:08

Suggested clip · 93 seconds

DANCO HOW TO | Replacing a Kitchen Sink Drain – YouTube

YouTube

Start of suggested clip

End of suggested clip

How do you use plumbers putty on a kitchen sink drain?

Roll plumber’s putty between your hands into a rope the size of a pencil and wrap it around the lip of the kitchen sink drain opening. Press the kitchen sink strainer firmly down into the putty, add the rubber gasket, friction ring and locknut under the sink, and retighten the locknut.

How do you install double sink plumbing?

Suggested clip · 88 seconds

Double Bowl Sink Drainage Installation – YouTube

YouTube

Start of suggested clip

End of suggested clip

Can I use silicone instead of plumbers putty?

Some plumbers and installers favor plumber’s putty for installing drains, while others lean toward the more modern waterproof material called silicone caulk. Both plumber’s putty and silicone caulk provide a watertight seal for a sink drain.

Can I use silicone caulk instead of plumbers putty?

Plumbers use it because it remains soft for a long time and maintains a watertight seal, but unlike silicone and other types of caulk, plumber’s putty is not an adhesive, so a fixture or drain part sealed with putty remains easy to remove if you ever need to replace it.

How do you seal a kitchen sink drain?

Suggested clip 67 seconds

Kitchen Sink Strainer – YouTube

YouTube

Start of suggested clip

End of suggested clip

What is the rough in for a kitchen sink?

The most common kitchen counter height is 36 inches, but it can vary from 30 to 45 inches. Rough-in plumbing is usually placed at a somewhat lower height, between 18 and 20 inches, to accommodate varying counter heights and sink depths and leave plenty of space for the P-trap and necessary connections.

How do you measure a kitchen sink drain?

A standard kitchen drain is 3 1/2 inches in diameter. This is the measurement across the center of the drain, from one side to another. The drain strainer, the bowl-shaped piece inside the drain mouth, matches this dimension. It is designed to sit inside the drain mount and seal it closed when flush to the drain bowl.

How long do you let plumbers putty set?

If you wait for it to dry, you’ll be waiting maybe 10/15 years. It doesn’t “dry”, but it will “dry out”. You can use the fixture immediately after installation with putty. The thing with plumbers putty is many people use way too much and then cannot get the drain tightened enough.

How long does plumbers putty last?

How Long Does It Take For Plumbers Putty To Dry. If you wait for it to dry, you’ll be waiting 10/15 years. It doesn’t “dry”, but it will “dry out”. You can use the fixture immediately after installation with putty.

How soon can you use sink after plumbers putty?

You need to be patient after applying the plumber putty at any fixture because it takes considerable time to dry. In most of the cases, it takes several hours to dry completely. If you apply it at the base of a faucet to stop the leakage of water, you have to wait for several hours before it dries out quickly.

How do you install a P trap under a kitchen sink?

How to Install the P-Trap under a Sink

  • Slide the short side of the P-trap onto the tailpiece that drops down from the sink drain.
  • Take the lower part of the P-trap apart and insert the trap arm into the wall drain fitting as far as it will go.
  • Pull the trap arm out of the wall fitting until it lines up with the top U-shaped portion of the trap.

How do you plumb a sink drain?

1:49

4:49

Suggested clip 116 seconds

How to Plumb a Drain – Sink Drain Pipes – YouTube

YouTube

Start of suggested clip

End of suggested clip

How much does it cost to add a double sink?

As such, it’s important to install a sink that not only looks good, but one you actually enjoy using. While the average sink installation cost ranges between $250 and $500, your overall sink replacement cost will largely depend on style, location and materials available.