# How Many Can Lights For A 12×12 Room??

The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans.

So in a 12′ room you’d probably want two rows of lights.

Considering it is a bedroom and you don’t need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights for a total of 8.

## How far apart should recessed lights be placed in a kitchen?

Also, the diameter of the bulb is consistent with how far the spacing should be: 4-inch bulbs should be 4 feet apart, 5-inch bulbs should be 5 feet apart, and 6-inch bulbs 6 feet. Overall, the wattage should range from 2 1/2 to 3 per square foot.

## How many recessed lights do I need calculator?

To determine how far apart to space your recessed lights, divide the height of the ceiling by two. If a room has an 8 foot ceiling, you should space your recessed lights approximately 4 feet apart. If the ceiling is 10 feet, you’ll want to put about 5 feet of space in between each fixture.

## How many lights should be in a kitchen?

50 footcandles is standard, but people over 50 years old may need 100 footcandles or more. Those over 50 should consider a 5-watt Light Channel to light their kitchen countertops; for those under 50, a 2.5 watt Light Channel should suffice.

## Where should recessed lights be placed in living room?

The common rule is that 4-inch fixtures should generally be placed at least 4 feet apart and 6-inch fixtures about 6 feet apart. Center recessed lighting fixtures in front of the objects you wish to light—a painting, bookshelf, or drapery panels, for example—and about 12 to 18 inches in front of that object.

## How many lights do I need in a room?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens. A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens.

## Where should recessed lights be placed in a kitchen?

The bottom line: For task lighting, cans should be placed 24 inches out from the wall, centered over the edge of the countertop. Admittedly, these test results are for a single recessed fixture and lamp in a dark kitchen under construction.

## How far should recessed lights be from the wall?

Space wall wash downlights apart at the same distance as they are mounted from the wall. For ceilings up to 9 feet high, mount recessed lights 2 to 3 feet from the wall and spaced 2 to 3 feet apart.

## Are LED recessed lights good for kitchen?

If your layout calls for recessed lights to be used throughout the kitchen space, you can use wide-angle lights in the center of the room and narrow-beam lights on the perimeter. Dimmers help you adjust the atmosphere and mood of the kitchen. They also help save energy and extend the average lifespan of your bulbs.

## How many recessed lights can you put on one switch?

The main limitation to the number of recessed fixtures you can run at the same time is the rating of the circuit breaker that controls the circuit. Each fixture with a 60-watt incandescent or halogen bulb draws about 1/2 amp, so a 15-amp breaker for a standard lighting circuit would be able to handle 30 of them.

## How many lights do I need per square foot?

For the average space of 250 square feet, you’ll need roughly 5,000 lumens as your primary light source (20 lumens x 250 square feet). In your dining room, you’ll want about 30 lumens per square foot on your dining table (you want to see your food, but not examine it), so if your table is 6 x 3 feet, that’s 540 lumens.

## How far apart do you put LED downlights?

Spacing. Recessed downlights are generally positioned 1.5 to 2 ft. away from walls with a space of 3 to 4 feet between each light. Dividing the ceiling height by two is a way of gauging how much space to leave between each downlight. Thus, if your ceiling is 8 foot high, place your lights 4 feet apart.

Photo in the article by “Wikipedia” `https://en.wikipedia.org/wiki/Oswego_Harbor_West_Pierhead_Light`